Capacity : 2500T, Stroke : 350mm, Die space adjustment: 10mm,Bed dimensions :(left to right x front to back) : 1280 x 1400 mm, Slide dimensions : (left to right x front to back) :1090 x 1150 mm,Press Uprights Height: 1000mm, Width: 800mm.

Capacity : 4000 ton, Slide stroke : 380 mm, Frequency of the slide strokes per min : 55spm, Shut height : 1380 mm, Width of bed under guide lines : 1580 mm, Bed dimensions : 1520×1600 mm, Slider dimensions : 1450×1440 mm, Slider adjustment : 15 mm, Overall width of machine : 4440 mm, Overall depth of machine : 4656 mm, Overall height of machine : 8570 mm, Overall weight (net) : 245000 kg, Working voltage of main drive : 3×380 V, Frequency : 50 Hz, Overall used machine capacity : 200 kW.

Capacity : 5000 ton.

Capacity : 4000t, Number of strokes : 45spm, Stroke length : 406mm, Main shaft dia at Journals : 686mm, Main shaft dia at Eccentric : 1048mm, Width of Eccentric Bearing : 812mm, Shut height with top knockout plate : 984mm, Shut height without top knockout plate : 1092mm, Die seat (left to right x front to back) : 1568 x 1625mm, Ram face (left to right x front to back) : 1422 x 1346mm, Approximate net weight : 460,000Lbs.

Capacity : 2500t, Stroke : 360mm, Shut height : 1000mm, Number of stroke : 70spm, Slide Adj : 7 mm, Ram size (left to right x front to back) : 1400 x 1400 mm, Bed size (left to right x front to back) : 1500 x 1400 mm.

Capacity : 1600ton, Die Height : 770mm, Stroke length: 280 mm, number of Stroke per minute : 20 - 40spm, Slide dimensions (left to right x front to back) : 950mm x 900mm, Bolster dimensions (left to right x front to back) : 1050mm x 1350mm, Slide adjustment : 12mm, Main motor : 75 Kw.

Capacity : 1600ton, Die Height : 820mm, Stroke length: 280 mm, number of Stroke per minute : 60 - 80spm, Slide dimensions (left to right x front to back) : 920mm x 1000mm, Bolster dimensions (left to right x front to back) : 1050mm x 1200mm, Slide adjustment : 17mm, Main motor : 75 Kw.

S:220 60spm DH:680 B:820x950mmxT:150mm

Capacity: 630ton,Slide Stroke : 180mm/Max 36 SPM,Die Height : 600mm,Adjust Dimensions : 60mm,Bolster Dimension : 1100*780*120,Slide Dimensions : 1090*680,Bed Knockout (S/C) 60mm/40ton,Main Motor : 55kw,Machine weight : 45,000kg.

STROKE; 355 60 SPM DIE HEIGHT; 934 ADJUST; 10 BOLSTER ; 1450x900,WITH TRANSFER EQUIP. FEED; 260 LIFT; 150 CLAMP; 100 MATERIAL DIA; 40~70 mm PRODUCTS DIA; 170

CAPACITY : 200T, With die cushion.

Capacity: 4000T, Ram stroke: 400(+/- 1.0), Distance from table to ram upper shoe when ram is at bottom of stroke: 1200 mm, Ram to table adjustment range: 10 (+/- 0.2), upper knockout: Capacity: 8T, Stroke: 82 mm, Bottom Knockout: capacity: 12.5T, Stroke: 82 mm, Table dimensions (LR x FR): 1710 x 1620 mm, Ram dimensions (LR x FR): 1470 x 1100 mm, Dimensions of opening in press racks: Min height: 1100 mm, Min. width: 1100 mm, Press overall dimensions: LR: 6628 (+/- 50) mm, FR: 5700 (+/- 50) mm, Height above floor level: 7830 (+/- 80) mm, Press mass: 366583 (+/- 3%) kg, Compressed air consumption per ram stroke: 115 cu.dm, Air pressure in air-pressure system MPa(kgf/sq. cm): min - 0.5 (5), max - 0.7 (7), No. of electrical motors: 4, Main drive electric motors: Power: 160 kW, Speed: 975 rpm, Shut height adjustment mechanism electric motors: Power: 5 kW, Speed: 720 mm, oil lubricating station electric motors: Power: 1.1 kW, Speed: 1400 rpm, Grease lubricating station electric motors: Power: 0.4 kW, Speed: 1400 rpm

Capacity: 1600 Ton, Slide Stroke: 300 mm, No. of Stroke: 85 spm, Die Height: 660 mm, Slide Adjustment: 10 mm, Ram size : 860X910,Slide Size : 940X1200mm,Upper knock-out Stroke : 40mm,Force tonnage : 6.3mm,Lower knock-out Stroke : 32mm, Force tonnage : 10mm,Bet Dimensions: Left/right-1050mm ,front/back-1200mm, Slide Dimensions: Left/right-600 mm, Front/back-910mm ,Dimensions of ports in press arms : height/minimum : 710mm,width/minimum : 630mm Overall Dimension: Left/right-4850mm, Front/back-3515mm,Height of press above floor level:5570mm, Main Electric Motor: 90 kW, MACHINE WEIGHT : 120TON UNDER POWER.

Capacity: 800t, Stroke: 200mm SPM: 60, Die Height: 500mm, Bolster Size: 1100mm X 850mm, Slide Area: 1100*800mm, Slide Adjustment: 5mm, Main Motor: 37 Kw

Capacity: 2500 T, Stroke length: 300 mm, Stroke per minutes: 70 SPM, Die Height: 910 mm, Ram Adjustment: 10 mm, Table size (LRxFR): 1420 x 1400 mm, Ram size (LRxFR): 1350 x 1250 mm

Capacity: 400t, Stroke: 140mm SPM: 45, Die Height: 370mm Bolster Size: 480mm X 600mm Slide Area: 370*500mm Slide Adjustment: 15mm Main Motor: 30 Kw

CAPACITY : 1000TON

CAPACITY : 1600TON, STROKE; 280, 75 SPM, DIE HEIGHT :765, ADJUST; 10 BOLSTER SIZE; 1240X1140 SIDE OPEN SIZE; 920X920 WITH KNOCK OUT

CAPACITY : 1500 TON, STROKE; 250 DIE HEIGHT; 700 35 SPM ADJUST; 10 BOLSTER SIZE; 1100X1000 SIDE OPEN SIZE; 450X400 WITH KNOCK OUT ALUMINIUM, WARM, COLD, KNUCKLE, HOT FORGING

6000t HOT FORGING PRESS + 500t TRIMMING PRESS Make : National (U.S.A). YOM : 1967 Stop Year : 2020 Final maintenance year : 2019 Production : Crankshaft Stroke : 457.2mm SPM : 36 Shut height Max : 1143mm per min - Min1120.8mm Opening of front : 1828.8mm (LR) * 1143mm(H) Opening of side : 965.2mm(FR) * 1092.3mm (H) KO Stroke : upper 101.6mm, below 203.2mm ( Dimensions) : 6000mm (W) * 5664mm (L)* 9169mm (H) Weight : approx 520T Installation space of press : 6198mm ( LR)* 5232mm (FR) Installation space of total equipment approx : 13m*24m 500t Trimming Press ( one gear part is missing) Make : Natori (Japan) Stroke : 300mm SPM : 20 Die Height : 950mm ( in case of adjust up) Ram adjustment : 130mm Main motir : 50hp (3000v) Diemensions : 2500mm (W) * 2812 mm (L) * 770mm (H) Weight approx : 55 t

Capacity: 4000T, Ram stroke: 400(+/- 1.0), Distance from table to ram upper shoe when ram is at bottom of stroke: 1000 mm, Ram to table adjustment range: 10 (+/- 0.5), upper knockout: Capacity: 8T, Stroke: 65 mm, Bottom Knockout: capacity: 12.5T, Stroke: 65 mm, Table dimensions (LR x FR): 1710 x 1620 mm, Ram dimensions (LR x FR): 1420 x 1420 mm, Dimensions of opening in press racks: Min height: 1100 mm, Min. width: 1100 mm, Press overall dimensions: LR: 6228 (+/- 50) mm, FR: 5515 (+/- 50) mm, Height above floor level: 7790 (+/- 80) mm, Press mass: 361370 (+/- 3%) kg, Compressed air consumption per ram stroke: 115 cu.dm, Air pressure in air-pressure system MPa(kgf/sq. cm): min - 0.5 (5), max - 0.7 (7), No. of electrical motors: 4, Main drive electric motors: Power: 160 kW, Speed: 975 rpm, Shut height adjustment mechanism electric motors: Power: 5 kW, Speed: 720 mm, oil lubricating station electric motors: Power: 1.1 kW, Speed: 1400 rpm, Grease lubricating station electric motors: Power: 0.4 kW, Speed: 1400 rpm

Capacity: 2500T, Die height: 1020 mm, Stroke Length: 320 mm, Ram Adjustment: 16 mm, Strokes per minute: 20 - 40 mm, Bolster size: 1900 x 1080 mm, Slide size: 1200 x 780 mm, Main Motor: 200 kW AC440V

Capacity : 400T, Stroke: 250 mm, Number of strokes: 40 spm, Die height: 700 mm, Bed Size : 1380*990mm, Slide Size : 1380*850mm.

CAPACITY : 1200T, Power (Lower dead Point): 1200T, permissive : Good Weight (Left, right, 100 MLC): 1200T, Stroke: 300, Slide Adjustment : 300mm, Lee Bottom : 850mm, Stroke Per Minute : 25spm, Number of Working Strokes per minute : 10 times, Die height: 850, Adjust: 300, Bolster: 2000x1600, Adaptor Area : 800*1600mm, Upper Knockout (Mechanical ) Power * Stroke : 7.5 T *50mm, With die cushion: 65ton, Pneumatic - 1 butt, 1 cylinder, in the upper limit of the ability : (maximum) - 35T, At the bottom : 65T, Main Electric Motors : 55KT*6P, Electric Motor for slide adjustment : 3.7KIT*4P, Use Air pressure CAS : 6, Electric : Source 200V*50Hz, Control Circuit : 100V*50HZ,

Capacity: 500T