Capacity : 300T, Stroke : 400mm, Stroke per Minute : 15-28spm, Die Height : 850mm, Bolster Area : 2300*1300mm,

Capacity (ton): 100, Stroke (mm) :140, Die Height (mm) :320, Bolster Area (mm) :830*760, Main Motor (kw) :5.5

Manufacture:KOMATSU, Model:E4S500-MB, Capacity (ton): 500, Y.O.M:1990, Stroke(mm):500, Slide Adjustment (mm):500, Strokes Per Minutes (min):13.5-20, Die Height (mm):1420, Slide Area (mm):2500*1700, Bolster Area (mm):2500*1700*230

Capacity: 500tT,Stroke (mm):300,Slide Adjustment (mm):250,Strokes Per Minutes (min): 15~45,Die Height (mm):650,Slide Area (mm):2500*1500, Bolster Area (mm):2500*1500,Main Motor (kw):75 With Coil Feeder-SPEC:- Thickness: 4 mm, Width: 600 mm Note: Machine already Dismandled.

Capacity:300T,Speed:20-60spm

Capacity:1200t,feed stroke:750mm,clamping stroke:210mm,lifting stroke:120mm,height of blank feed:645mm,height of pannel carryout:475mm,height of feed bar face:625mmm,min blank size:150x460mm,blank thickness:0.5-1.66mm

Capacity:4000ton,Load curve : 13mm, Stroke Length : 500mm, Die height : 1550mm, Bolster area : 7620mmx1980mmx350mm, Slide adjustment : 500mm, Cushion Pad : 990mmx1080mm, Distance between Pad and Bolster :10mm, Number of Die cushion pad : 7, Die cushion capacity: 441(63x7)Ton, Die cushion stroke: 250mm, Stroke per minute: 6SPM, Motor Specifications:1.Main Motor: Hitachi,220KW,400V, 2.Slide Adjustment Motor:Hitachi,15KW,200V,3.Motor for Hydraulic unit: Hitachi,15KW,200V,4.Brake cooling Motor:Hitachi,2.2KW,200V,5.Grease Pump Motor: Hitachi,0.2KW,200V, 6.Motor for cushion packing oil: Hitachi, 2.2KW,200V.

stroke length:450mm, number of strokes:25spm, die height:675mm, slide adjustment:200mm, bolster dimension:(front and back � left and right): 1900✕1200mm,Slide area:2100x1350mm

Capacity:300ton, Die height:900mm, Stroke per minute:20~60SPM, Bolster area: 2770x1800mm,slide area:2500x1800mm, moving bolster, with feeder and Feeder Miminum thickness:0.6mm, maximum thickness:3.2mm, width:1.5mm,

capacity: 300ton,stroke length: 350mm, die height: 700mm,number of stages:10, stroke per minute:2.(20-40)3.(20-30), maximum drawing depth:2.(120)3.(180), slide adjustment: 100mm,slide area: 3000x1000mm, bolster area: 3000x1000mm, working floor height: 1070mm above floor level, :ORII feeder year :1983: roll minimum thickness:0.3~3.2mm, width:30-600mm

Capacity:300ton, Stroke length:450mm, Stroke per minute:15~25mm, Bolster area:2100x1350mm, Slide area:1900x1200mm,Main motor:37KW

Capacity: 300 ton Transfer Press, Stages-8 SPM : 30~60, DH : 500, 30Kw

Capacity 300 tons, Stroke length 450, Number stroke 18, Die height 700, Slide adjustment amount 200, Slide area 1900 � 1200, Bolster area 2150 � 1350, The main motor 30 Kw, Slide adjustment motor 2.2 Kw, With Die-cushion Capacity 50 tons (1 putt), Stroke length 225, Pat area 1500 � 660, Ray type with safety equipment, with portable stand, This machine is currently in use.

Capacity : 1200t, Normal pressure : 254 kgf/cm, Stroke length : 1700mm, Daylight : 2200mm, Table area : 3500 x 2200mm, Inertia drop value : 70mm, Emergency stop time : 200m/sec.

Capacity : 500t, Stroke length : 1500mm, Maximum sliding speed : 150 mm/sec, Slide inertia lowering value : 150mm, Emergency stop time : 220ms.

Capacity : 1400t, Stroke length : 1600mm, Die height : 2600mm, Table area (left to right x front to back) : 4000 x 2400mm, Emergency stop time : 270ms.

Capacity: 1500T, Stroke length:1700 mm, High Pressure: 30.1MPa, Bolster dimensions : 3500X2500mm, Bottom of slide290mm/s, Daylight: 2000mm.

Capacity : 250T, Day light: 700 mm, Bolster dimension: 1800*1000mm, Slide dimension : 1200*800mm, With die cushion.

Capacity : 150ton, Stroke : 200mm, Daylight : 750mm, Bolster : 1400x1100mm, Slide : 1400x1100mm, Motor : 45kw.

Capacity : 400t, Stroke length : 630mm, Open height : 1000mm, Slide dimension (left to right x front to back) : 1200mmx850mm, Bolster dimension (left to right x front to back) : 2000mmx1300mm.

hydraulic press Maximum pressure: 20.7MPa S: 500 Downloads: 600 T: 1000*700

Capacity: 200 T, Stroke length: 300 mm, Table dimensions: 2000 x 1000 mm, Slide dimensions: 2000 x 700 mm, Daylight: 600 mm.

Capacity : 425T, Stroke length : 500mm, Die Height : 700mm, Bolster dimension (left to right x front to back) : 900 x 700mm.

Capacity : 400t, Stroke length : 630mm, Open height : 1000mm, Slide dimension (left to right x front to back) : 1200mmx850mm, Bolster dimension (left to right x front to back) : 2000mmx1300mm.

CAPACITY : 600T hydraulic Press, Stroke : 900, Die Height : 1200, Bolster Size : 3200*1000,