Capacity : 630T, Total Force : 4000~6000kN, Shear Force : 1800~5850kN, Ring Indenter Force : 320~3200kN, Counter Force : 160~1600kN, Safety Distance : 173mm, Ram Slowing Down Path Max : 12mm, Ram Closing Speed : 120mm/s

Capacity: 500T, Stroke: 180 mm, Daylight: 500 mm, Max descending speed: 180 mm/sec, Motor: 75 kW 6P

Capacity : 800T, Stroke(mm) : 280 FEEDER SPEC: MAKER:DAEBONG, YOM :2010, Coil Width : 50-450mm, Coil Thickness :10t, Coil Weight :5000kg, Coil out-dia :1800mm, Coil in-dia :508mm, Feed length: DIGITAL SETTING, Main motor: 7kw, Mandrel expansion : EXPANSION, Pneumatic pressure : 5kg/㎠, Hydraulic pressure : 100kg/㎠（MAX）, Power source : 440V 　3-PHASE

Technical specs pressure: 630T, plate thickness: 16 mm, SLIDE: total force (nominal): 630, stroke min.: 30 mm , stroke: 150 mm, cutting velocity min.: 3 (mm/s), cutting velocity max.: 50 (mm/s), closing velocity: 120 (mm/s), returning velocity: 135 (mm/s), V-RING: nominal force: 320, stroke: 40 mm, COUNTER RAM: nominal force: 160, stroke: 40 mm, TOOL DIMENSIONS: lower table - width: 910 mm, lower table - depth: 1350 mm, upper table - width: 900 mm, upper table - depth: 900 mm, daylight max.: 410 mm, STRIP-FEEDER: feeder type: roll feeder: nominal force: 6000 kN, sheet width max: 450 mm, sheet thickness max: 16 mm, feeding step min.: 1 mm

Capacity : 200T, Stroke Length : 30mm, Number of stroke : 100-300spm, Die height : 560mm, Slide adjustment : 50mm, Slide dimensions (left to right x front to back) : 1700 x 650mm, Bolster dimensions (left to right x front to back) :1700 x 950mm, (square hole) with VS.

Capacity : 125T, Stroke Length : 31.75mm, Number of stroke : 0-700spm, Shut height : 508mm, Slide adjustment : 51mm, Bolster dimensions (left to right x front to back) :1219 x 819mm, Clutch Air Pressure for rated tonnage in pounds : 60.

Capacity : 200T, Stroke Length : 30mm, Number of stroke : 140-350spm, Die height : 440mm, Slide adjustment : 50mm, Slide dimensions (left to right x front to back) : 1700 x 650mm, Bolster dimensions (left to right x front to back) :1700 x 950mm, (square hole) with VS.

Capacity : 100T, Stroke Length : 80mm, Number of stroke : 0-100spm, Die height : 370mm, Slide Adjustment : 50mm, Slide Area:(left to right) : 1140 X 500mm, Bolster dimensions (left to right x front to back) : 1450 X600 X 115mm, Bed opening (front to back) : 750 x 250mm, Main Motor : 22kW 4P.

Capacity : 200T,Stroke Length : 200mm, Number of stroke : 40~160spm, Die height : 320mm, Slide Adjustment : 35mm, Bolster dimension (left to right) : 1810mm, Slide opening (front to back) : 170mm, Main Motor : 60hp.

CAPACITY : 200T,STROKE LENGTH : 200mm, NUMBER OF STROKE : 48~100spm, SLIDE ADJUSTMENT :100mm, SLIDE DIMENSION (LEFT to RIGHT,FRONT to BACK) : 1500*1100mm, BOLSTER DIMENSION (LEFT to RIGHT,FRONT to BACK) : 1500*900mm,DIE HEIGHT : 450mm, MAIN MOTOR : 50kw.NC LEVELER FEED , MAXIMUM FEED LENGTH : 500mm, ROLL LENGTH :420mm, COIL THICKNESS : 0.6~6.0mm, MAXIMUM COIL WIDTH : 400mm, MAXIMUM COIL OUTER DIA : 1500mm, SPINDLE MOTOR CAPACITY : 1.5KW, COIL WEIGHT MAX : 3000kg.

CAPACITY : 60T,Stroke of slide : 40MM,SPM : 180~380MM,Die height : 320MM,Adjustment of slide : 50MM,Slide area : 320*360MM,Bolster : 1080*470*145MM,Bed opening : 600*180MM,Stopping time : 260MS.

Capa : 1100KN .Stroke : 80mm .spm : 40 - 150 .Die height : 350mm .Slide : 1200 x 520mm .Bolster : 1200 x 550mm

Capacity : 80t, Stroke length : 25mm, Number of stroke : 600spm, Die Height : 245mm , Slide Adjustment : 50mm, Bolster size (L-R x F-B)L: 740 * 1050mm, Slide area (L-R x F-B) : 500 * 1050mm, Main Motor: 22kw.

Capacity : 80t, Stroke length : 25mm, Number of stroke : 600spm, Die Height : 245mm, Slide Adjustment : 50mm, Bolster size (L-R x F-B)L: 740 * 1050mm, Slide area (L-R x F-B) : 500 * 1050mm, Main Motor: 22kw.

Capacity : 125T, Stroke : 30, Spm : 120 ~ 300 spm , Die Height : 360 , Bolster : 1100 * 800

Capacity : 150T, Stroke : 250 , Spm : 50-120 spm , Die Height : 500 Bolster : 2000 * 800

CAPACITY :30T, STROKE : 30 SPM: 150-600spm ,DIE HEIGHT : 250, BLOSTER SIZE: 500 * 400 Oilmatic Feeder Sankyo VG25

CAPACITY : 40T, STROKE : 25, SPM :200-1000, DIE HEIGHT : 230, BLOSTER : 750 * 540 Feeder: VG25

Capacity : 30T, Stroke : 15, spm : 200-1600spm, Die Height: 230, slide Adjustment: 50

Capacity : 30T ,Stroke : 15, spm : 200-1000, slide Adjustment: 50, With feeder Vario VG25 ,With soundproof BOX

capacity : 30T 　　Crank motion 2 point press 〇 Ability 　　Pressurized pressure 300KN Capacity generation position 1.6mm 〇 Stroke 　　Stroke length 20mm 　　Number of strokes 200-1000 spm (no load continuous) 〇 Work load 　　Continuous work is 300J at 200spm or more 　　Micro inching about 60 spm 〇 Interference distance 　　Die height 230mm 　　Slide adjustment amount 50 mm 　　Floor bolster top surface height 1020 mm 〇Slide and bolsda 　　Slide surface dimensions 550 mm x 320 mm 　　Bolster surface dimensions 550 mm x 450 mm 　　Bolster thickness 100 mm 　　Maximum upper type suspension mass 80 kg 〇 Motor 　　Main motor 11kw (inverter) 〇 Machine mass 　　Gross weight 6t 〇Auxiliary feeder specifications 　　Model VG20M (manufactured by Sankyo Seisakusho) Model gripper feeder 　　Material plate width 7mm-40mm Material plate thickness 0mm-0.7mm 　　Feed length range 0 mm to 21 mm Feed line height 80 mm ± 20 mm above the bolster 　　Feed angle 165 ° (at crank angle 277.5 ° to 82.5 °) 　　Feed direction left to right

Capacity : 110T Stroke : 80mm SPM : 60 ~180spm Slide Adjustment: 30, Slide : 1200*520 Die Height : 310, Bolster Size : 1200 * 500 ,SL Size : 1200 * 520 With Utani roll feeder, leveler and soundproof box.

Capacity : 300T, Stroke length : 30mm, SPM : 130~300 spm, DH : 420mm, ADJ : 80mm, Bolstor :1700*900, Slide : 1550*700, SLIDE ADJUSTMENT LENGHT : 80mm, Motor : 30Kw.

Capacity: 25T, Stroke: 32mm, Stroke per Minute: 950mm, Stroke length: 51mm, Die Height: 229.5mm, Bolster Size: 530*530mm, Slide Size: 438*360mm Motor: 22kW

Capacity : 300T, Stroke length : 30mm, SPM : 120~300 spm, DH : 420mm, ADJ : 80mm, Bolstor :1500*900, Slide : 1350*700, Motor : 75Kw, Attachment : Feeder : BBV-320/200, Max material width : 150~200mm, Feed length : 2.5-120mm, Materialthickness : 3~6mm, with UTAC UNCOIL LINE SYSTEMS