Capacity : 2500T, Stroke : 350mm, Die space adjustment: 10mm,Bed dimensions :(left to right x front to back) : 1280 x 1400 mm, Slide dimensions : (left to right x front to back) :1090 x 1150 mm,Press Uprights Height: 1000mm, Width: 800mm.

Capacity : 4000 ton, Slide stroke : 380 mm, Frequency of the slide strokes per min : 55spm, Shut height : 1380 mm, Width of bed under guide lines : 1580 mm, Bed dimensions : 1520×1600 mm, Slider dimensions : 1450×1440 mm, Slider adjustment : 15 mm, Overall width of machine : 4440 mm, Overall depth of machine : 4656 mm, Overall height of machine : 8570 mm, Overall weight (net) : 245000 kg, Working voltage of main drive : 3×380 V, Frequency : 50 Hz, Overall used machine capacity : 200 kW.

Capacity : 5000 ton.

Capacity : 4000t, Number of strokes : 45spm, Stroke length : 406mm, Main shaft dia at Journals : 686mm, Main shaft dia at Eccentric : 1048mm, Width of Eccentric Bearing : 812mm, Shut height with top knockout plate : 984mm, Shut height without top knockout plate : 1092mm, Die seat (left to right x front to back) : 1568 x 1625mm, Ram face (left to right x front to back) : 1422 x 1346mm, Approximate net weight : 460,000Lbs.

Capacity : 2500t, Stroke : 360mm, Shut height : 1000mm, Number of stroke : 70spm, Slide Adj : 7 mm, Ram size (left to right x front to back) : 1400 x 1400 mm, Bed size (left to right x front to back) : 1500 x 1400 mm.

Capacity : 1600ton, Die Height : 770mm, Stroke length: 280 mm, number of Stroke per minute : 20 - 40spm, Slide dimensions (left to right x front to back) : 950mm x 900mm, Bolster dimensions (left to right x front to back) : 1050mm x 1350mm, Slide adjustment : 12mm, Main motor : 75 Kw.

Capacity : 1600ton, Die Height : 820mm, Stroke length: 280 mm, number of Stroke per minute : 60 - 80spm, Slide dimensions (left to right x front to back) : 920mm x 1000mm, Bolster dimensions (left to right x front to back) : 1050mm x 1200mm, Slide adjustment : 17mm, Main motor : 75 Kw.

S:220 60spm DH:680 B:820x950mmxT:150mm

Capacity: 630ton,Slide Stroke : 180mm/Max 36 SPM,Die Height : 600mm,Adjust Dimensions : 60mm,Bolster Dimension : 1100*780*120,Slide Dimensions : 1090*680,Bed Knockout (S/C) 60mm/40ton,Main Motor : 55kw,Machine weight : 45,000kg.

STROKE; 355 60 SPM DIE HEIGHT; 934 ADJUST; 10 BOLSTER ; 1450x900,WITH TRANSFER EQUIP. FEED; 260 LIFT; 150 CLAMP; 100 MATERIAL DIA; 40~70 mm PRODUCTS DIA; 170

CAPACITY : 200T, With die cushion.

Capacity: 4000T, Ram stroke: 400(+/- 1.0), Distance from table to ram upper shoe when ram is at bottom of stroke: 1200 mm, Ram to table adjustment range: 10 (+/- 0.2), upper knockout: Capacity: 8T, Stroke: 82 mm, Bottom Knockout: capacity: 12.5T, Stroke: 82 mm, Table dimensions (LR x FR): 1710 x 1620 mm, Ram dimensions (LR x FR): 1470 x 1100 mm, Dimensions of opening in press racks: Min height: 1100 mm, Min. width: 1100 mm, Press overall dimensions: LR: 6628 (+/- 50) mm, FR: 5700 (+/- 50) mm, Height above floor level: 7830 (+/- 80) mm, Press mass: 366583 (+/- 3%) kg, Compressed air consumption per ram stroke: 115 cu.dm, Air pressure in air-pressure system MPa(kgf/sq. cm): min - 0.5 (5), max - 0.7 (7), No. of electrical motors: 4, Main drive electric motors: Power: 160 kW, Speed: 975 rpm, Shut height adjustment mechanism electric motors: Power: 5 kW, Speed: 720 mm, oil lubricating station electric motors: Power: 1.1 kW, Speed: 1400 rpm, Grease lubricating station electric motors: Power: 0.4 kW, Speed: 1400 rpm

Capacity: 1600 Ton, Slide Stroke: 300 mm, No. of Stroke: 85 spm, Die Height: 660 mm, Slide Adjustment: 10 mm, Ram size : 860X910,Slide Size : 940X1200mm,Upper knock-out Stroke : 40mm,Force tonnage : 6.3mm,Lower knock-out Stroke : 32mm, Force tonnage : 10mm,Bet Dimensions: Left/right-1050mm ,front/back-1200mm, Slide Dimensions: Left/right-600 mm, Front/back-910mm ,Dimensions of ports in press arms : height/minimum : 710mm,width/minimum : 630mm Overall Dimension: Left/right-4850mm, Front/back-3515mm,Height of press above floor level:5570mm, Main Electric Motor: 90 kW, MACHINE WEIGHT : 120TON UNDER POWER.

Capacity: 800t, Stroke: 200mm SPM: 60, Die Height: 500mm, Bolster Size: 1100mm X 850mm, Slide Area: 1100*800mm, Slide Adjustment: 5mm, Main Motor: 37 Kw

Capacity: 2500 T, Stroke length: 300 mm, Stroke per minutes: 70 SPM, Die Height: 910 mm, Ram Adjustment: 10 mm, Table size (LRxFR): 1420 x 1400 mm, Ram size (LRxFR): 1350 x 1250 mm

Capacity: 400t, Stroke: 140mm SPM: 45, Die Height: 370mm Bolster Size: 480mm X 600mm Slide Area: 370*500mm Slide Adjustment: 15mm Main Motor: 30 Kw

CAPACITY : 1000TON

CAPACITY : 1600TON, STROKE; 280, 75 SPM, DIE HEIGHT :765, ADJUST; 10 BOLSTER SIZE; 1240X1140 SIDE OPEN SIZE; 920X920 WITH KNOCK OUT

CAPACITY : 1500 TON, STROKE; 250 DIE HEIGHT; 700 35 SPM ADJUST; 10 BOLSTER SIZE; 1100X1000 SIDE OPEN SIZE; 450X400 WITH KNOCK OUT ALUMINIUM, WARM, COLD, KNUCKLE, HOT FORGING

6000t HOT FORGING PRESS + 500t TRIMMING PRESS Make : National (U.S.A). YOM : 1967 Stop Year : 2020 Final maintenance year : 2019 Production : Crankshaft Stroke : 457.2mm SPM : 36 Shut height Max : 1143mm per min - Min1120.8mm Opening of front : 1828.8mm (LR) * 1143mm(H) Opening of side : 965.2mm(FR) * 1092.3mm (H) KO Stroke : upper 101.6mm, below 203.2mm ( Dimensions) : 6000mm (W) * 5664mm (L)* 9169mm (H) Weight : approx 520T Installation space of press : 6198mm ( LR)* 5232mm (FR) Installation space of total equipment approx : 13m*24m 500t Trimming Press ( one gear part is missing) Make : Natori (Japan) Stroke : 300mm SPM : 20 Die Height : 950mm ( in case of adjust up) Ram adjustment : 130mm Main motir : 50hp (3000v) Diemensions : 2500mm (W) * 2812 mm (L) * 770mm (H) Weight approx : 55 t

Capacity: 4000T, Ram stroke: 400(+/- 1.0), Distance from table to ram upper shoe when ram is at bottom of stroke: 1000 mm, Ram to table adjustment range: 10 (+/- 0.5), upper knockout: Capacity: 8T, Stroke: 65 mm, Bottom Knockout: capacity: 12.5T, Stroke: 65 mm, Table dimensions (LR x FR): 1710 x 1620 mm, Ram dimensions (LR x FR): 1420 x 1420 mm, Dimensions of opening in press racks: Min height: 1100 mm, Min. width: 1100 mm, Press overall dimensions: LR: 6228 (+/- 50) mm, FR: 5515 (+/- 50) mm, Height above floor level: 7790 (+/- 80) mm, Press mass: 361370 (+/- 3%) kg, Compressed air consumption per ram stroke: 115 cu.dm, Air pressure in air-pressure system MPa(kgf/sq. cm): min - 0.5 (5), max - 0.7 (7), No. of electrical motors: 4, Main drive electric motors: Power: 160 kW, Speed: 975 rpm, Shut height adjustment mechanism electric motors: Power: 5 kW, Speed: 720 mm, oil lubricating station electric motors: Power: 1.1 kW, Speed: 1400 rpm, Grease lubricating station electric motors: Power: 0.4 kW, Speed: 1400 rpm

Capacity: 2500T, Die height: 1020 mm, Stroke Length: 320 mm, Ram Adjustment: 16 mm, Strokes per minute: 20 - 40 mm, Bolster size: 1900 x 1080 mm, Slide size: 1200 x 780 mm, Main Motor: 200 kW AC440V

Capacity : 400T, Stroke: 250 mm, Number of strokes: 40 spm, Die height: 700 mm, Bed Size : 1380*990mm, Slide Size : 1380*850mm.

CAPACITY : 1200T, Power (Lower dead Point): 1200T, permissive : Good Weight (Left, right, 100 MLC): 1200T, Stroke: 300, Slide Adjustment : 300mm, Lee Bottom : 850mm, Stroke Per Minute : 25spm, Number of Working Strokes per minute : 10 times, Die height: 850, Adjust: 300, Bolster: 2000x1600, Adaptor Area : 800*1600mm, Upper Knockout (Mechanical ) Power * Stroke : 7.5 T *50mm, With die cushion: 65ton, Pneumatic - 1 butt, 1 cylinder, in the upper limit of the ability : (maximum) - 35T, At the bottom : 65T, Main Electric Motors : 55KT*6P, Electric Motor for slide adjustment : 3.7KIT*4P, Use Air pressure CAS : 6, Electric : Source 200V*50Hz, Control Circuit : 100V*50HZ,

Capacity: 500T

Capacity: 1000T, Stroke length: 400 mm, No. of Strokes: approx. 16 spm, Shut height: 750 mm (from stroke down, adjust up to bed surface), Slide Adj: 120 mm, Bed size (RL*FB): 1100*1600 mm, Slide size (RL*FB): 800*1000 mm, Main motor: 200V.6P.75 HP, Adjust motor: 200V.4P.75 HP, Air pressure (Normal use): 5 kg/sq.cm, Ability limit: Max. ability 1000T is generated at 30 mm above stroke dead point

Capacity: 200 T, Stroke: 200 mm, SPM: 25, Die Height: 450 mm, Bolster Area: 1000 mm * 1000 mm, Slide Area: 470 mm * 450 mm, Slide Adjustment Area: 70 mm, Main Motor: 15 KW. (Ref.No-H0110)

Capacity: 630 Ton

Capacity : 440T, Load Curve : 6mm, Stroke Length : 300mm, SPM : 50, Slide Adjustment : 25, Slide Area : 1470* 840, Bolster Area : 1590 * 990, Main motor : 37kw

Note: DOUBLE CONNECTING ROD, Capacity: 150 ton, Stroke Per Minute: 35(SPM),Stroke length: 200 mm,Die height: 300 mm, Slide adjustment: 80 mm,Bolster size: 1340 x 600 mm, Slide area: 1280 x 400 mm

Capacity: 250ton, StrokePerMinute: 45(SPM),Stroke length: 250mm,Die height: 550mm, Slide adjustment: 100mm,Bolster size: 1000x1000mm, Slide area: 600x600mm

CAPACITY 250T,STROKE 250mm,DIE HEIGHT 550mm,slide adj 200mm,speed 50spm,bolster area 1000*850,slide size 800*850,die cushion capacity 40T

Capacity: 500ton, StrokePerMinute: 20(SPM),Stroke length: 250mm,Die height: 600mm, Slide adjustment: 100mm,Bolster size: 1300x1000mm, Slide area: 1000x700mm, Motar 55kw*6P

Capacity: 400 Ton, Stroke: 400 mm, Slide Adjustment: 160 mm, Strokes Per Minute: 25 min, Die Height: 470 mm, Slide Area: 800 x 800 mm, Bolster Area: 1000 x 1000 mm, Main Motor: 40 KW

Capacity : 450t, Stroke length : 105mm, Number of stroke : 45 spm, Motor driving : 37(6P) Kw, Motor Refueling : 0.1(4P) Kw, Feed rate : 40 m/min, Machine (Height x width x length) : 2.9 x 2.3 x 3.0mm, Feeder (Height x width x length) : 1.35 x 3.375 x 7.5mm, Cutting machine weight : 31500 kg, Feeder weight : 3500 kg.

Capacity : 1000 Ton.

Capacity : 600t, Number of Stroke : 30Spm, Stroke length : 120mm, Machine Dimension : 3300*2300*3500mm, height*weight*length : 1350*3380*7500, Feeder weight : 4900kg, Machine weight : 38000kg.

Capacity: 450T, Stroke: 45 SPM, Length: 105mm, Motor drive dynamic: 45KW (6P), Supply oil: 0.4KW (4P), Feed rate : 0.25 MM/SEC, Reduction gear motor: 2.2(4P), Air pressure: 5-6kg/cm2 , Feeder: 1.35x3.375x7.5m , Machine(Weight): 34500kg, Feeder: (kg)3500, Cutting dia : 40mm ~ 85mm, Machine H x w X L(m) : 2.9x2.3x3.0,

CAPACITY : 300T

Capacity: 1600T, Stroke: 180 mm, no. of stroke at continuous: 17 spm, Permissible no. of cuts at single stroke: 15, Stop length: 100 - 1000 mm, Length of roller conveyor: 6000 mm, Speed of roller conveyor: 0.3/0.6 m/s, Main Motor rating: 110 kW, Net weight approx: 84,000 kg

Capacity: 200 Ton, Stroke Length: 50 mm, No.of Stroke: 80 spm, Brake: Band brake, Main Motor: 30 kW.4P.220 V, Refueling System: Concentrated Automatic Circulation Refueling System, Control Panel: NC Type ECO-FI Control unit Incorporation, Ram Stroke Type: Integrated Direction Type, Air Pressure: 4-5 kg/sq. cm ACCESSORIES: 1.Air Pressure Reduction Detection Device 2.Refueling Abnormal Detector 3.Cutting Zone Safety Cover 4.Digital Cutting Number Counter CUTTING JIG SPECIFICATION: Model: JMN-200, Cutting Method: Axial Direction Pressurisation Restriction Cutting, Cutting Blade Shape: Upper Blade:Round, Lower Blade: Round, Max Cutting Diameter: dia. 60 mm (S10C), Min.Cutting Diagram: dia. 25 mm, Max.Cutting Length: 200 mm, Min.Cutting Length: Blade Thickness + 2 mm, Material Detector: Air Pressure Detector, Sizing Device: Full Automatic Digital Sizing Device, Dimension Fixing Device: Magnetic Lock Device, Sizing Motor: 0.75 kW.4P.220 V, Blade Change System: Die Set System, Die Set Exchange Time: Quick Change (Approx.1.min), Die Set Fixing Method: BT Pascal Clamp, Blade Life: 8000-12,000 pcs, Blade Adjust Tolerance: Upper 6 mm, Lower: 20 mm, Blade Clearance Adjustment: Manual Handle, Terminal Processing Method: Full Auto Non-Error Method ACCESSORIES: 1. Rear Clamp 2. Stopper Head Screw 3. Cassette Holder Extended Rail 4. Digital Production Counter 5. Terminal Processing Skute MACHINE VIDEO: https://youtu.be/IkNRWBkEmBY

Capacity: 300ton, Stroke per minute: 40SPM, stroke length: 90mm, motor driving(KW):37(6P), refueling(KW):0.4(4P), Feed rate:30m/min, Deceleration motor:2.2(4P),amount of air:45Nl/per, machine height2.5xwidth1.6xlength2.6mm, cutting machine weight:17000kg, feeder weight:2700kg

Capacity:1400t, Die height:580, stroke:155, Motor:20HP, RPM:970, Job length:100-850 [NOTE: We have included the before dismantled and after dismantled photos]

Capacity: 1250T, Allowable max capacity: 1600T, Regular maximum Capacity:1400T,Effective forming Energy:20.0t-m,Bed Effective Area width-Depth: 900mmX1060mm,Screw Diameter: 315mm, No. ofstroke:24spm,Workstroke:36spm,SlidesizewidthDepth:900mmX1060mm,AirPressure:5kg/cm, Shutheight:850mm,Daylight:1250mm.

CAPACITY : 2000 KN, STROKE LENGTH : 300 mm, SHUT HEIGHT : 525 mm,BED AREA(FB x LR) : 650 x 580, MAIN MOTOR : 18.5 KW.

Capacity: 200Ton.

Capacity : 2000T, Stroke: 670 mm, Number of strokes: 14spm, Daylight: 1650 mm, Table dimensions (left and right * front and back) : 1150 * 1400mm, Bottom surface of the slide (left and right * front and back) : 1000 *1350mm.

Capacity : 1000T, Stroke: 475 mm, Number of strokes: 2 spm, Open height: 1250 mm, Table dimensions 900 x 1100mm

Capacity: 2500T, Allowable max capacity: 3750 T, Screw Diameter: 540 mm, No. of stroke: 15 spm, Work stroke: 10 spm, Stroke: 750 mm, Daylight: 1850 mm, Allowable Eccentricity: 470 mm, Table size: 1250 x 1500 mm, Slide size: 1250 x 1500 mm, Knockout Capacity: 20T, Knockout Stroke: 100 mm, Motor: 220 kw/30 kw, Size: 6600 x 6000 x 9100 x 2800 mm

Capacity: 2000T, Allowable max capacity: 3000 T, Screw Diameter: 480 mm, No. of stroke: 16 spm, Work stroke: 10 spm, Stroke: 670 mm, Daylight: 1650 mm, Allowable Eccentricity: 420 mm, Table size: 1150 x 1400 mm, Slide size: 1000 x 1150 mm, Knockout Capacity: 20T, Knockout Stroke: 100 mm, Motor: 160 kw/30 kw, Size: 6200 x 5500 x 8500 x 2800 mm

Capacity: 1000T, Allowable max capacity: 1500 T, Screw Diameter: 340 mm, No. of stroke: 24 spm, Work stroke: 15 spm, Stroke: 475 mm, Daylight: 1200 mm, Allowable Eccentricity: 290 mm, Table size: 900 x 1100 mm, Slide size: 800 x 900 mm, Knockout Capacity: 10T, Knockout Stroke: 100 mm, Motor: 90 kw, 18.5 kw, Size: 5100 x 4700 x 6800 x 2000 mm

Capacity: 800ton,Screw Diameter: 280mm, Ram Stroke: 425mm, Table size: 710 x 900mm, Daylight: 1135mm

Capacity: 300 Ton, Stroke Length: 500 mm, Die Height: 515 mm, Open Height: 1015 mm, Bolster Area: 440 mm * 1000 mm, Slide Area: 400 mm * 1000 mm, Main Motor: 30 KW * 4P, Height: 4520 mm, Width: 2600 mm, Depth: 1950 mm.

Capacity: 1000 Ton, Adjusting Range of Capacity: 300 ῀ 1000 Ton, Die Height: 1200 mm, Stroke: 600 mm, SPM: 20, Table Size: 1000 mm * 1000 mm, Slide Size: 850 mm * 850 mm, Bottom Knock Out Type � Hydraulic Type, Bottom Knock Out Capacity: 5 Ton, Bottom Knock Out Stroke: 100 mm, Top Knock Out Type � Mechanical Type, Top Knock Out Capacity: 3 Ton, Top Knock Out Stroke: 50 mm, Pump Vane Type: 1000 RPM, Main Motor: 75 KW, Motor for Hydraulic Line: 7.5 KW

Capacity:1600N, S:700mm, strokes per minute:10, Die height:550mm, Bed size: 1100x1250mm,132KW,4KW

capacity:2500t, Slide:800mm,stroke per minute:9SPM, Die height:680mm, Bed size: 1200x1560mm, 110KWx2, 4KW

Capacity: 3000T

Capacity : 250 ton, 200Vlots,50HZ,110A

Capacity:800ton

Pressing force: 1000TON Daylight: 2300 Stroke: 1300 Table area: 2000X1500

Capacity: 10000T, Maximal force : 10,000 ton, First stage force : 4,000 ton, Second stage force : 6,000 ton, Third stage force : 10,000 ton, Working stroke : 2,500 mm, Free stroke speed : 0,3 m/sec, Loaded stroke speed : 0,07 m/sec, Table dimensions :11,200X4000X680 mm, Table mooving speed : 0,2 m/sec, Total weight approx : 2,290 ton

Capacity : 12000T, Bolster size : 6000*2500, Manipulator : 400T

Press type :oil hydraulic press 4 column push down Max forging force : 13,000t Internal size : 6.5*8.0m Manipulator: 450t- m

CAPACITY : 8000T,Press type :oil hydraulic press, 4 column push down, Max forging force : 10,500t Internal size : 5.15*7.5m Manipulator:240t- m

Capacity : 3000T, 2- pillar Hydraulic press, Internal size : 2900 x 3000mm.

Capacity(Ton) : 700, Stroke (mm) : 1100, Down speed(mm/min):　8000, UP speed(mm/min) :　9700, Press speed(mm/min):　1280, Dielight (mm) : 1600, Bolster Area (mm) : 1700*1200, Main Motor (kw)　: 45kw * 6P * 4

Capacity: 1000T, Stroke: 1500mm, Stroke Speed: 15 - 50 SPM, Daylight: 2500mm, Bed Size: 1260 x 2600mm, Main Motor: 250kw x 6P x 2, with 2ton Manupurator

Capcity : 630t, Stroke : 270mm, Die Height : 606mm, Bolster Area : 1350 x 850mm.